Pourable Concrete Patch makes repairing large holes and spalls easy. This fiber reinforced, easy to mix, pourable material makes quick repairs to level concrete surfaces.

• Fast return to service; foot traffic in 30 minutes and vehicle traffic in as little as 2 hours
• Just add water, mix and pour
• Can be applied up to 4 inches deep in a single application
• Suitable for interior and exterior use, will set up at temperatures down to 40° F

Available Sizes

• 55 lb. Kit
• 10 lb. Kit

InstaPatch® Ultra-Rapid Curing Concrete Repair patches and repairs damaged concrete floors in just minutes, significantly reducing downtime. This two component, low odor, 100% solids polyurea repair material is the ideal solution for occupied spaces where minimal disruption is required.

• Ultra-rapid return to service time - fully cured in 15 minutes
• Easy 1:1 mix ratio
• Can be poured or trowel applied
• Low temperature application - down to -5° F
• VOC compliant nationwide

For Best Results

• Fill the crack to slight excess and allow to cure. Grind to a level surface.

Available Sizes

• 1 Gallon Kit

6700 System 100% Solids Epoxy uses a unique cycloaliphatic hybrid chemistry that provides a high gloss, chemical and abrasion resistant finish for use in industrial and commercial environments. This unique chemistry also provides a 60 minute working time for an easy application experience for the end user.

• User friendly – Easy to mix two component system with a 60 minute pot life
• High gloss, chemical and abrasion resistant finish
• Fast return to service time; light traffic in 12-16 hours, vehicle traffic in 36-48 hours
• No primer required over properly prepared concrete
• VOC compliant nationwide 
• 2A:1B mix ratio

Available Sizes 

• 3 Gallon Kit Custom
• 15 Gallon Kit Custom

Please note: The below items are MTO only. Reach out to a rep for further details

• 6700 3 Gallon Kit Custom
• 6700 15 Gallon Kit Custom
• 6700 15 Gallon Kit Armor Gray
• 6700 15 Gallon Kit Light Gray
• 6700 15 Gallon Kit Dunes Tan
• 6700 15 Gallon Kit Clear

Concrete Saver FastKote® & FastKote® UV are fast-cure polyurea floor coatings that fully cure and accept vehicle traffic in only 24 hours. These high gloss coatings are highly chemical and abrasion resistant and ideal for use in industrial and commercial facilities. 

• Fast return to service time; light traffic in 4-6 hours, vehicle traffic in 24 hours
• Polyurea formula provides excellent chemical and abrasion resistance
• User friendly brush & roller application
• Packaged as a high gloss finish. For a satin, slightly textured finish, add the Concrete Saver Durability Additive (sold separately)
• VOC compliant nationwide

For Best Results 

• Repair damaged concrete first with InstaPatch™.

Available Sizes

• One gallon