Rust-Oleum High Performance V2100 System Rust Preventive Enamel Spray Paint is ideal for industrial painting projects. It can be used on metal, steel, masonry and wood. The advanced formula provides the best-possible corrosion protection with easy, one-coat coverage and long-lasting color, gloss and durability. 

• Tough, professional finish that resists chipping, cracking and peeling
• High-output tip covers 50% faster
• Dries to the touch in 20 minutes
• Comes with a 2-year rust-proof guarantee
• Withstands heat to 200°F 
• Works as a touch-up paint -- most V2100 enamel spray paint colors match the 7400 or V7400 System
• Meets USDA requirements for incidental food contact; accepted for use in federally registered Canadian food facilities; VOC-compliant nationwide

For Best Results

• For large projects, apply using the High Performance Comfort Grip.

ROCAcrylic® Direct-to-Metal Acrylic Enamel 3800 is a high-performance, fast drying, water-based coating for interior or exterior use. This product provides excellent corrosion and adhesion, UV and impact resistance suitable for painting multiple surfaces anywhere an ultra-smooth, durable finish is desired, and corrosion protection is required.

• Fast Drying, Water-Based Formula
  
• Excellent Corrosion Protection
  
• Ultra-Smooth Finished Appearance
  
• UV Resistant for Color and Gloss Retention
  
• Two Year Rust-Proof Guarantee*

ROCEpoxy® Direct-to-Metal Epoxy Mastic 9100 is a two-component, high solids epoxy coating that provides a durable, abrasion and chemical resistant protective surface suitable for most all industrial environments. As Rust-Oleum’s most versatile industrial product, it can be applied directly to sound rusted steel, galvanized metal, clean steel, concrete, and even slightly damp surfaces. This product was developed with the end user in mind. It has a convenient 1:1 mix ratio, a pot life of a minimum of two hours, and has multiple activator options, including: Fast Cure, Low Temp, Immersion, Satin Finish as well as the Standard activator. Can also be used as a primer under Rust-Oleum ROCThane high performance topcoats. ROCEpoxy Direct-to-Metal Epoxy Mastic 9100 is available in two VOC levels, 340 VOC and 250 VOC, depending on the activator you choose. 

• Extremely Versatile, Easy to Use, Durable, Solvent-Based Epoxy
• Direct-to-Metal and Self-Priming on a Variety of Substrates
• Ultra-Smooth Finish with High Build Capability on Edges and Welds
• Superior Resistance to Solvents, Chemical, Abrasion and Impact
• Five Year Rust-Proof Guarantee*

Available Sizes

• One Gallon
• Five Gallon

The MULE is an easy-to-use Modified Urethane Latex Epoxy. It’s abrasion resistant, which makes it the ideal coating for high-traffic areas that are routinely cleaned and disinfected. This urethanized acrylic coating can be applied on indoor or outdoor surfaces including walls, doors, trim, railings and floors.

• Ultra-smooth finish
• Highly washable
• Great adhesion on multiple surfaces
• Low-odor, water-based formula
• For interior and exterior use
• VOC compliant nationwide

Where To Use The Mule

• Interior and exterior walls, doors, trim and floors
• Prepared and primed surfaces including metal, concrete, brick, cinderblock, wood and drywall 
• Previously painted surfaces
• Commercial spaces, offices, schools, hospitality, health care facilities and more

Available Sizes

• 1 Gallon
• 5 Gallon